Search

Superwand DS and Superwand PRO

Superwand-Schimmel

Against mould and black spots​

Buildings with a poor basic structure in Germany, Switzerland, England and Austria often have not just high energy losses but also unpleasant interior conditions in some cases and suffer from mould growth, particularly at thermal bridges.

Superwand

Using our Superwand DS insulation boards not only reduces energy losses but also improves the conditions on the surface and the room air.

  • Superwand DS guarantees optimum thermal insulation with minimum thickness
  • Superwand DS with a built-in vapour barrier

What Superwand DS has to offer:

  • The integrated aluminium foil acts as a vapour barrier and prevents any later development of mould behind the insulation
  • Requires little space (only 10 mm or 20 mm) with maximum thermal insulation
  • Saves energy costs thanks to the high thermal insulation value
    56% with the 20 mm panel
    40% with the 10 mm panel
  • Allows low-cost renovation work since no changes are needed to doors, windows etc.
  • Can be wallpapered, painted or plastered with no problems
  • No HBCD included
  • Tried and tested for 25 years in Switzerland and 10 years in Germany

If the mildew still attracts a few centimeters in the ceiling or in the einbindende inner wall, our UNIVERSAL insulation wedge is suitable for cost-effective renovation.

Assembly instructions of UNIVERSAL insulation wedge

Superwand DS soffit panel

For reasons of space (window hinges …), it is occasionally difficult, the window reveals the Superwand DS – to insulate plates. Because often the 10 mm Superwall DS is too thick, we have been offering a new 5 mm thin Superwand DS soffit panel.
Details of Superwand DS soffit panel (german)

Superwand DS edge protection

To protect the edges additionally in the soffits, it is advisable to install the Superwand DS edge protection (from a paper carrier and two aluminum strip).
Details for Superwand DS edge protection (german)
Heitmann

Mr. Andreas Heitmann

Representative for the following German code areas : 0-3, 48, 49, 55, 6-9

Benefit from the experience of our consultants for mold damage TÜV specialist (TÜV certificate).

e-mail: andreas.heitmann@korff.ch

phone: +49 (0) 173 370 61 15
Christmann

Mr. Arndt Christmann

Representative for the following German code areas : 40-47, 50-54, 56-59

Benefit from the experience of our consultants for mold damage TÜV specialist (TÜV certificate).

e-mail: arndt.christmann@me.com

phone: +49 (0) 171 625 95 20
  • 10 mm and 20 mm thickness
  • Format 80 x 125 cm
  • Brandclass B2
  • Vapour diffusion resistance sd-Wert = 550 m equiv. air space thickness
  • 30 mm and 50 mm thickness
  • Format 78 x 123 cm
  • Brandclass B2
  • Vapour diffusion resistance sd-Wert = 550 m equiv. air space thickness

U-value calculation > (german)

Product inquiry







    Enter code:

    captcha

    Products

    Aluminium vapour barriers

    Building products

    Laboratory foils

    Certificates

    EORI numbers and terms & conditions

    Company

    Address